Concealed water investigation
Leak detection across Sydney
Investigate unexplained water use, damp and concealed leaks, then understand what access or plumbing repair may be needed.
Call Tommy
0410 908 209Reviews provided by 
Clues worth noting
Look for a pattern, not just a wet patch
Where and when moisture appears can help distinguish supply plumbing, drainage, fixtures and roof-water sources.
A meter that keeps moving
With all known water use off, continued meter movement can indicate water is still flowing somewhere.
Staining or damp that returns
Note whether it follows water use, rain or no obvious event.
A sudden change in water use
An unexplained increase can support the case for checking the property plumbing.
Water appearing away from a fixture
The visible point may not be the source, because water can travel through finishes and cavities.
Targeted investigation
Narrow down the likely source first
Leak detection is an investigation of the accessible evidence, not a promise that every concealed source can be located without opening anything.
Symptom and meter review
Start with the pattern of water use, visible signs and the areas affected.
Accessible fixture and pipe checks
Test the plumbing most relevant to the reported symptom.
Source direction
Explain what the evidence supports and where a more direct inspection or repair may be needed.
Plan the plumbing response
TotalCare also handles general repairs and roof drainage. The source and urgency determine what work is needed; call promptly if water is actively escaping.
Investigation path
Evidence before disruption
The aim is to make each next check more informed than the last.
Record the pattern
Note when the sign appears, what plumbing was in use and whether rain changes it.
Check the most relevant plumbing
Inspect and test accessible fixtures and pipework connected to the symptoms.
Compare the findings
Use the result of each check to narrow down or rule out likely sources.
Agree the next opening or repair
Discuss any further access or repair only when the available evidence supports it.
Common questions
Leak detection questions
How can I check for a possible hidden leak?
Turn off known water-using fixtures and check whether the water meter continues to move. Do not turn off equipment or enter areas that are unsafe.
Can leak detection avoid all opening of walls or floors?
Not always. The investigation can narrow down the likely source, but direct access may still be needed to confirm or repair concealed plumbing.
Is every damp patch caused by a plumbing leak?
No. Rain entry, waterproofing, condensation and other building issues can produce similar signs. The timing and accessible checks help distinguish them.
What if water is escaping now?
Use Emergency Plumbing and call Tommy rather than waiting for an estimate enquiry response.
Can TotalCare help if the leak is linked to rain?
TotalCare also investigates roof drainage and private stormwater faults. Tell Tommy when the moisture appears so the likely source can be checked. Roof coverings, waterproofing and other building defects may need another trade.
Need a plumber?
Speak directly with Tommy
Call for urgent help, or send the job details when the work can be planned.